Close
Main Categories
    Filters
    Preferences
    Search

    Robotics

    View as Grid List
    Sort by
    Display per page

    31024: AXLE COUPLING CLIP 8

    #31024
    $0.18

    313rpm 6-12V HD Planetary Gearmotor

    #638280
    $32.04

    Operating Specifications:

    • Operating Voltage Range: 6~12VDC
    • Rated Voltage: 12VDC
    • Rated Load: 4.5 kgf-cm (62.5 oz-in)
    • Operating Temperature: -10 ~ +60°C
    • Max No-Load Current: 0.52A
    • No-Load Speed: 313 RPM
    • Min. Stall Torque: 30 kgf-cm (416.6 oz-in)
    • Max. Stall Current: 20A @ 12VDC
    • Dielectric Strength: 250 VAC
    • Motor Brush Type: Graphite
    • Output Power at Max. Efficieny: 13W
    • Gear Type: Planetary
    • Gear Ratio: 27:1
    • Bearing Type: Dual Ball Bearing
    • Shaft size: 6mm (0.236”)
    • Net Weight: 330g (11.64oz)

    32 Pitch, 24 Tooth Bevel Gears - 1/4" Bore

    #615398
    $4.79
    Now you can build right angle drives inside or outside of channel with these new 24 tooth, 32 pitch bevel gears. We offer them in four bore sizes, 1/4”, 4mm, 5mm and 6mm. Great for building differentials or any application where you need to transfer rotational motion 90 degrees. Sold individually with set-screw.

    32 Tooth Gear (2 pack)

    #76220-2
    $12.99

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness: 6.35mm
    • Hole Diameter: 14mm
    • Step File

    336mm Flat Beam

    #76042
    $3.49

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 336mm
    • Step File

    336mm Square Beam

    #76102
    $8.49

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 336mm
    • Step File

    384mm Flat Beam

    #76041
    $3.99

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 384mm
    • Step File

    384mm Square Beam

    #76101
    $9.99

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 384mm
    • Step File

    432mm Flat Beam

    #76040
    $4.99

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 432mm
    • Step File

    432mm Square Beam

    #76100
    $11.99

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 432mm
    • Step File

    48mm Flat Beam

    #76048
    $1.49

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 48mm
    • Step File

    48mm Square Beam

    #76108
    $2.49

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 48mm
    • Step File

    48mm U Channel (2 pack)

    #76018-2
    $5.99

    The Studica U Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 48mm
    • Width - 48mm
    • Length - 48mm
    • Hole pattern - 1
    • Step File

     

     

     

    4rpm 3-12V DC Gearmotor

    #638162
    $20.02
    • Operating Range: 3-12VDC
    • Torque @ Max Efficiency: 205 oz-in. (12V)
    • Torque @ Stall: 992 oz-in.@12VDC
    • Stall Current: 0.5A @ 12VDC
    • Gear train damage can occur if stalled (locked)
    • .240” (6mm) Diameter Shaft
    • No load current: 45mA
    • No load current @ Max Efficiency: 160mA
    • No load speed: 4 RPM
    • No load speed @ Max Efficiency: 2.8 RPM
    • Gear ratio: 900:1
    • Motor size: 1.30"Dia. x 1.015"L
    • Gear size: 1.45"Dia. x 1.15"L
    • Shaft size: 6mm (0.236”) Dia. x 0.715"L
    • Weight: 0.2938 lbs. (4.7 oz.)
    • DC reversible motors
    • Solder type terminal
    • High torque construction
    • Oil bearing design for long service life
    • Insulation resistance: 10 MOhm
    • Dielectric Strength: 300VDC

    50mm Drive Wheel, 35A, 25mm wide, 1/2" Inner Hex, Green

    #76267
    $6.99

    The 50mm (2") Drive Wheel can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.

    Use with 1/2" hex shaft or use 6mm Shaft Hub to use connect 6mm D-Shaft Axles.

    Specifications:

    • Diameter:   50mm (2")
    • Axial width:  25mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Green
    • Outer Material Durometer: 35A
    • Weight: 0.038kg
    • Step File

    50mm Drive Wheel, 40A, 25mm wide, 1/2" Inner Hex, Orange

    #76268
    $6.99

    The 50mm (2") Drive Wheel can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.

    Use with 1/2" hex shaft or use 6mm Shaft Hub to use connect 6mm D-Shaft Axles.

    Specifications:

    • Diameter:   50mm (2")
    • Axial width:  25mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Orange
    • Outer Material Durometer: 40A
    • Weight: 0.038kg
    • Step File

    50mm Drive Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue

    #76269
    $6.99

    The 50mm (2") Drive Wheel can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.

    Use with 1/2" hex shaft or use 6mm Shaft Hub to use connect 6mm D-Shaft Axles.

    Specifications:

    • Diameter:   50mm (2")
    • Axial width:  25mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Blue
    • Outer Material Durometer: 50A
    • Weight: 0.038kg
    • Step File

    50mm Drive Wheel, 60A, 25mm wide, 1/2" Inner Hex, Black

    #76270
    $6.99

    The 50mm (2") Drive Wheel can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.

    Use with 1/2" hex shaft or use 6mm Shaft Hub to use connect 6mm D-Shaft Axles.

    Specifications:

    • Diameter:   50mm (2")
    • Axial width:  25mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Black
    • Outer Material Durometer: 60A
    • Weight: 0.038kg
    • Step File

    612rpm 6-12V HD Planetary Gearmotor

    #638284
    $32.04

    Operating Specifications:

    • Operating Voltage Range: 6~12VDC
    • Rated Voltage: 12VDC
    • Rated Load: 2.3 kgf-cm (31.9 oz-in)
    • Operating Temperature: -10 ~ +60°C
    • Max No-Load Current: 0.52A
    • No-Load Speed: 612 RPM
    • Min. Stall Torque: 16 kgf-cm (222.2 oz-in)
    • Max. Stall Current: 20A @ 12VDC
    • Dielectric Strength: 250 VAC
    • Motor Brush Type: Graphite
    • Output Power at Max. Efficieny: 13W
    • Gear Type: Planetary
    • Gear Ratio: 14:1
    • Bearing Type: Dual Ball Bearing
    • Shaft size: 6mm (0.236”)
    • Net Weight: 330g (11.64oz)

    64 Tooth Gear (2 pack)

    #76221-2
    $24.99

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness: 6.35mm
    • Hole Diameter: 14mm
    • Number of teeth: 64
    • Step File

    6mm Shaft Hub (4 pack)

    #76284-4
    $9.99

    The 6mm Shaft hub is used to connect any Studica wheel and the Studica motor or any motor with a 6mm shaft.

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm ID
    • Hole pattern for connecting to structure
    • Step File

    6mm XL Pulley, 10 Tooth (2 pack)

    #76232-2
    $12.99

    Used with Maverick DC Motor with 6mm shaft and all 6mm D-Shaft Axels. Matching belt 10mm Timing Belt, # 76233.

    Specifications:

    • 10 Tooth Timing Pulley
    • 6mm Bore 
    • material: 6061 T6 Aluminum
    • Step File

    75mm Drive Wheel 60A 12.5mm wide 1/2" Inner Hex Black

    #76271
    $6.99

    The 75mm Drive Wheel can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.

    Use with 1/2" hex shaft of use 6mm Shaft Hub to use connect 6mm D-Shaft Axles.

    Specifications:

    • Diameter:   75mm
    • Axial width:  12.5mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Black
    • Outer Material Durometer: 60A
    • Weight: 0.05kg
    • Step File

    90 Degree Bracket (2 pack)

    #76081-2
    $6.99

    The 90 Degree Bracket is perfect for connecting two channels pieces at 90 angle from each other. Each side is 48mm wide to fit perfectly on the channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File