Close
Main Categories
    Filters
    Preferences
    Search

    Robotics Parts

    View as Grid List
    Sort by
    Display per page

    5mm Hex Shaft Hub Kit

    #76288
    $7.99

    This Hub allows user that have existing Studica OMNI wheels (Part# 76260) or Mecanum Wheels (Part# 76243) to use REV Robotics 5mm Hex shafts and Hex Motors.

     

    6mm Servo Hub 25T

    #76149
    $5.99

    The 6mm Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a D-Shaft axel.

    Cobra Line Follower Sensor

    #70151
    $9.99

    The Cobra Line Follower Array provides 4 X QRE1113 IR reflectance sensor mounted on a 9mm pitch Each sensor is comprised of two parts - an IR emitting LED and an IR sensitive phototransistor. When you apply power to the VCC and GND pins the IR LED inside the sensor will illuminate.

    The Studica Line Sensor Board consists of 4 IR LED/phototransistor pairs, making it a great detector for a line-following robot.  The Line Sensor Board allows the robot to tell objects or surfaces apart based on how dark or light they are. It shines a beam of infrared light out onto the object, and measures how much light is reflected back.

    Each sensor provides a separate analog voltage output. The sensor board is an infrared emitter/receiver that is able to differentiate between a dark surface (with low IR reflectivity – 3.3V to 5V) and a light surface (with high IR reflectivity – 0V to 0.5V). However, this range can vary depended on the installed height of the sensor board. 

    The optimum height distance is 3-5 mm; however, the reflectivity values will change depending on distance. A daylight filter is built into the sensor.

    • 5VDC operating voltage (recommended)
    • 70mA supply current
    • Optimal sensing distance: 0.125" (3mm)
    • Step File

    Linear RC Actuator 140mm 200N

    #75014
    $69.99

    Coming soon!

    The Linear RC Actuator 140mm 200N is a new Servo motor which has a stroke of 140mm, a force of 200N

    Linear RC Actuator 140mm 50N

    #75013
    $69.99

    Coming soon!

    The Linear RC Actuator 140mm 50N is a new Servo motor which has a stroke of 140mm, a force of 50N

    Linear RC Actuator 50mm 200N

    #75011
    $64.99

    Linear RC Actuator 50mm 50N

    #75010
    $64.99

    Coming soon!

    The Linear RC Actuator 50mm 50N has a stroke of 50mm, a force of 50N

    Maverick DC Gear Motor 60:1 w/Encoder

    #75001
    $28.99

    The Maverick 12V DC Gear Motor 60:1 w/Encoder was designed for strength to endure competitions, providing a stall torque of 65 min. kgf-cm.

    Specifications:

    • Voltage:                        12 volts
    • Length:                         127.5mm
    • Gear Ratios:                 60:1
    • Axel diameter:             6mm D-Shaft
    • Diameter:                     37mm
    • Stall Torque:                 65 min. kgf-cm (902 oz-in)
    • RPM:                               100
    • Encoder:                        high-resolution Hall effect, 12ppr, total count 732 per shaft rotation
    • Weight:                          0.33kgs
    • Power cable:                 PP45, 45cm, 14AWG
    • Encoder Cable:             45cm, 22AWG
    • Step File

    Motor Mount Clamp Kit

    #76141
    $10.99

    Use the Motor Mount Clamp kit when fastening motors on body and attaching kit to channel and other structure.

     

    Motor Mount Plate

    #76140
    $6.49

    The Motor Mount Plate is used with the Maverick 12V DC Gear Motor  (Part# 75001) to attach it inside the anyone of the U Channels 76010 to 76018. This is an example of a chassis with 4 motors mounted inside the U-Channel using a Motor Mounting Plate.

     

     

     

     

    Motor Mount Plate Leaf

    #76139
    $4.99

    Motor Pack

    #70263
    $175.00

    Includes,

    • 4 - Maverick 12V DC Gear Motor w/Encoder  75001
    • 4 - Motor Mount Plate  76140
    • 4 - Motor Mount Clamp Kit  76141
    • 1 - M3 x 10mm Button Head Cap Screw (pack of 50)  76203-50

    Multi-Mode Smart Servo

    #75002
    $23.99

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Specifications:

    Type:                             Metal Brush Motor
    Horn Gear Spline:       25T (5.9mm)
    Size:                               40mm x 20.1mm x 38.3mm
    Weight:                          65g
    Maximum Speed:        62RPM at 6V
    Stall Torque:                 20kg.cm at 6V
    Voltage:                         6-7 4V
    Cable:                             22AWG, 75cm

    Robot Base Plate (288mm x 336mm x 3mm)

    #74001
    $38.99

    The Studica Robot Base Plate is 3mm thick and as with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 288mm
    • Length - 336mm
    • Step File

    Servo Mount Flat Plate

    #76145
    $6.49

    The Servo Mount Flat Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

    Servo Mount Offset Plate

    #76146
    $6.99

    The Servo Mount Offset Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

    Servo Power Block

    #75006
    $36.99

    The Studica Servo Power Module is a 6V, 60W power injector that enables the use of high-power RC servos. The Servo Power Module passes through input signals unaltered while providing up to 60W of total output power across all eight channels.  The input and output channels accept standard 3-wire, 0.1” pitch, servo/PWM cables. 

    Features,

    • Built in DC-DC converter
    • Over-current shutdown
    • ESD protection

    Specifications,

    • Nominal Input Voltage: 12V
    • Operational Voltage Range: 6.0V
    • Number of Channels: 8
    • Max Current for All Channels Combined: 10A
    • Total Continuous Power: 60W
    • Size: 70mm x 45mm x 16mm
    • Step File

     

    Shaft Coupling 6mm ID, 12mm OD (2 pack)

    #76303-2
    $3.99

    Can be used with 6mm D-Shaft Axel and 6mm shaft DC motor. 

     

    Specifcations:

    • Material: 6061-T6 Aluminum
    • Inside Diameter: 6mm
    • Outside Diameter: 12mm
    • Step File

    Sharp IR Range Sensor (10cm to 80cm) w/wire

    #40117
    $13.99

    The Sharp IR Distance Sensor GP2Y0A21YK0F uses a beam of infrared light to reflect off an object to measure its distance. Because it uses triangulation of the beam of light to calculate the distance, it is able to provide consistent and reliable readings which are less sensitive to temperature variation or the object’s reflectivity. The sensor outputs an analog voltage corresponding to the distance of the object, and can easily be read using an inexpensive analog to digital converter (ADC) chip.

    Ultrasonic Distance Sensor

    #70753
    $17.99
    • Stable, accurate distance measurement
    • High precision, blind spots (3cm) super close
    • A full set of ranging process
    • Step File

    100mm Drive Wheel, 50A, 12.5mm wide, 1/2" Inner Hex, Blue

    #76261
    $9.99

    The 100mm Drive Wheel (4") can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.

    Use with 1/2" hex shaft of use 6mm Shaft Hub to use connect 6mm D-Shaft Axles.

    Specifications:

    • Diameter:   100mm (4")
    • Axial width:  12.5mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Blue
    • Outer Material Durometer: 50A
    • Weight: 0.068kg

    100mm Drive Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue

    #76262
    $10.99

    The 100mm Drive Wheel (4") can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.

    Use with 1/2" hex shaft of use 6mm Shaft Hub to use connect 6mm D-Shaft Axles.

    Specifications:

    • Diameter:   100mm (4")
    • Axial width:  25 mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Blue
    • Outer Material Durometer: 50A
    • Weight: 0.068kg

    100mm Flex Wheel, 35A, 25mm wide, 1/2" Inner Hex, Green

    #76263
    $7.99

    The 100mm (4") Flex Wheel can be used for intake systems and conveyors.

    Specifications:

    • Diameter:   100mm (4")
    • Axial width:  25mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Green
    • Outer Material Durometer: 35A
    • Weight: 0.038kg

    100mm Flex Wheel, 40A, 25mm wide, 1/2" Inner Hex, Orange

    #76264
    $7.99

    The 100mm (4") Flex Wheel can be used for intake systems and conveyors.

    Specifications:

    • Diameter:   100mm (4")
    • Axial width:  25mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Orange
    • Outer Material Durometer: 40A
    • Weight: 0.038kg
    • Step File

    100mm Flex Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue

    #76265
    $7.99

    The 100mm (4") Flex Wheel can be used for intake systems and conveyors.

    Specifications:

    • Diameter:   100mm (4")
    • Axial width:  25mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Blue
    • Outer Material Durometer: 50A
    • Weight: 0.038kg
    • Step File

    100mm Flex Wheel, 60A, 25mm wide, 1/2" Inner Hex, Black

    #76266
    $7.99

    The 100mm (4") Flex Wheel can be used for intake systems and conveyors.

    Specifications:

    • Diameter:   100mm (4")
    • Axial width:  25mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Black
    • Outer Material Durometer: 60A
    • Weight: 0.038kg
    • Step File

    1-1 Motor Kit, 5mm Hex Shaft

    #76289
    $7.99

    1-1 Motor Kit, 6mm D-Shaft

    #76290
    $7.99

    120 Degree Bracket (2 pack)

    #76080-2
    $12.99

    The 120 Degree Bracket is perfect for connecting two channel pieces at 120 degrees from each other. Each side is 48mm wide to fit perfectly on the channel. Use three brackets with 3 channel pieces to make 3 wheeled robots. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

     

    128 Tooth Gear

    #76222
    $19.99

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness: 6.35mm
    • Hole Diameter: 14mm
    • Number of teeth: 128
    • Step File

     

    13 Tooth Bevel Gear (2 pack)

    #76223-2
    $13.99

    Specifications:

    • Material: 6061-T6 Aluminum
    • Number of teeth: 13
    • Step File

     

    135 Degree Bracket (2 pack)

    #76082-2
    $6.99

    The 135 Degree Bracket is perfect for connecting two channels pieces at 45 degrees from each other. Each side is 48mm wide to fit perfectly on the channel. Used for intake systems, elevator systems, or structure where 45 degrees is required. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

    144mm Flat Beam

    #76046
    $2.19

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 144mm
    • Step File

    144mm Square Beam

    #76106
    $4.69

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 144mm
    • Step File

    192mm Flat Beam

    #76045
    $2.39

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 192mm
    • Step File

    192mm Square Beam

    #76105
    $6.49

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 192mm
    • Step File

    192mm x 96mm Flat Bracket (2 pack)

    #76066-2
    $15.99

    The Studica 192mm x 96mm Flat Bracket is a very strong  3mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 96mm
    • Length - 192mm
    • Step File

     

    240mm Flat Beam

    #76044
    $2.89

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 240mm
    • Step File

    r.

    240mm Square Beam

    #76104
    $6.99

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 240mm
    • Step File

    26 Tooth Bevel Gear (2 pack)

    #76224-2
    $14.99

    Specifications:

    • Material: 6061-T6 Aluminum
    • Number of teeth: 26
    • Step File

     

    288mm Flat Beam (2 pack)

    #76043-2
    $5.99

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 288mm
    • Step File

    .

    288mm Square Beam

    #76103
    $7.99

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 288mm
    • Step File

    3/8" Shaft Hub

    #76285
    $6.49

    30 Tooth Bevel Gear, 1-to-1 Set (2 pack)

    #76219-2
    $29.99

    Specifications:

    • Material: Steel
    • Number of teeth: 30
    • Set of 2 for 1-1 drives
    • Step File

    31024: AXLE COUPLING CLIP 8

    #31024
    $0.18

    313rpm 6-12V HD Planetary Gearmotor

    #638280
    $32.04

    Operating Specifications:

    • Operating Voltage Range: 6~12VDC
    • Rated Voltage: 12VDC
    • Rated Load: 4.5 kgf-cm (62.5 oz-in)
    • Operating Temperature: -10 ~ +60°C
    • Max No-Load Current: 0.52A
    • No-Load Speed: 313 RPM
    • Min. Stall Torque: 30 kgf-cm (416.6 oz-in)
    • Max. Stall Current: 20A @ 12VDC
    • Dielectric Strength: 250 VAC
    • Motor Brush Type: Graphite
    • Output Power at Max. Efficieny: 13W
    • Gear Type: Planetary
    • Gear Ratio: 27:1
    • Bearing Type: Dual Ball Bearing
    • Shaft size: 6mm (0.236”)
    • Net Weight: 330g (11.64oz)

    32 Pitch, 24 Tooth Bevel Gears - 1/4" Bore

    #615398
    $4.79
    Now you can build right angle drives inside or outside of channel with these new 24 tooth, 32 pitch bevel gears. We offer them in four bore sizes, 1/4”, 4mm, 5mm and 6mm. Great for building differentials or any application where you need to transfer rotational motion 90 degrees. Sold individually with set-screw.

    32 Tooth Gear (2 pack)

    #76220-2
    $12.99

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness: 6.35mm
    • Hole Diameter: 14mm
    • Step File

    336mm Flat Beam

    #76042
    $3.49

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 336mm
    • Step File

    336mm Square Beam

    #76102
    $8.49

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 336mm
    • Step File

    384mm Flat Beam

    #76041
    $3.99

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 384mm
    • Step File

    384mm Square Beam

    #76101
    $9.99

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 384mm
    • Step File

    432mm Flat Beam

    #76040
    $4.99

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 432mm
    • Step File

    432mm Square Beam

    #76100
    $11.99

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 432mm
    • Step File

    48mm Flat Beam

    #76048
    $1.49

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 48mm
    • Step File

    48mm Square Beam

    #76108
    $2.49

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 48mm
    • Step File

    48mm U Channel (2 pack)

    #76018-2
    $5.99

    The Studica U Channel is 3mm thick and has a 48mm x 48mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 48mm
    • Width - 48mm
    • Length - 48mm
    • Hole pattern - 1
    • Step File

     

     

     

    4rpm 3-12V DC Gearmotor

    #638162
    $20.02
    • Operating Range: 3-12VDC
    • Torque @ Max Efficiency: 205 oz-in. (12V)
    • Torque @ Stall: 992 oz-in.@12VDC
    • Stall Current: 0.5A @ 12VDC
    • Gear train damage can occur if stalled (locked)
    • .240” (6mm) Diameter Shaft
    • No load current: 45mA
    • No load current @ Max Efficiency: 160mA
    • No load speed: 4 RPM
    • No load speed @ Max Efficiency: 2.8 RPM
    • Gear ratio: 900:1
    • Motor size: 1.30"Dia. x 1.015"L
    • Gear size: 1.45"Dia. x 1.15"L
    • Shaft size: 6mm (0.236”) Dia. x 0.715"L
    • Weight: 0.2938 lbs. (4.7 oz.)
    • DC reversible motors
    • Solder type terminal
    • High torque construction
    • Oil bearing design for long service life
    • Insulation resistance: 10 MOhm
    • Dielectric Strength: 300VDC

    50mm Drive Wheel, 35A, 25mm wide, 1/2" Inner Hex, Green

    #76267
    $6.99

    The 50mm (2") Drive Wheel can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.

    Use with 1/2" hex shaft or use 6mm Shaft Hub to use connect 6mm D-Shaft Axles.

    Specifications:

    • Diameter:   50mm (2")
    • Axial width:  25mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Green
    • Outer Material Durometer: 35A
    • Weight: 0.038kg
    • Step File

    50mm Drive Wheel, 40A, 25mm wide, 1/2" Inner Hex, Orange

    #76268
    $6.99

    The 50mm (2") Drive Wheel can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.

    Use with 1/2" hex shaft or use 6mm Shaft Hub to use connect 6mm D-Shaft Axles.

    Specifications:

    • Diameter:   50mm (2")
    • Axial width:  25mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Orange
    • Outer Material Durometer: 40A
    • Weight: 0.038kg
    • Step File

    50mm Drive Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue

    #76269
    $6.99

    The 50mm (2") Drive Wheel can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.

    Use with 1/2" hex shaft or use 6mm Shaft Hub to use connect 6mm D-Shaft Axles.

    Specifications:

    • Diameter:   50mm (2")
    • Axial width:  25mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Blue
    • Outer Material Durometer: 50A
    • Weight: 0.038kg
    • Step File

    50mm Drive Wheel, 60A, 25mm wide, 1/2" Inner Hex, Black

    #76270
    $6.99

    The 50mm (2") Drive Wheel can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.

    Use with 1/2" hex shaft or use 6mm Shaft Hub to use connect 6mm D-Shaft Axles.

    Specifications:

    • Diameter:   50mm (2")
    • Axial width:  25mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Black
    • Outer Material Durometer: 60A
    • Weight: 0.038kg
    • Step File

    612rpm 6-12V HD Planetary Gearmotor

    #638284
    $32.04

    Operating Specifications:

    • Operating Voltage Range: 6~12VDC
    • Rated Voltage: 12VDC
    • Rated Load: 2.3 kgf-cm (31.9 oz-in)
    • Operating Temperature: -10 ~ +60°C
    • Max No-Load Current: 0.52A
    • No-Load Speed: 612 RPM
    • Min. Stall Torque: 16 kgf-cm (222.2 oz-in)
    • Max. Stall Current: 20A @ 12VDC
    • Dielectric Strength: 250 VAC
    • Motor Brush Type: Graphite
    • Output Power at Max. Efficieny: 13W
    • Gear Type: Planetary
    • Gear Ratio: 14:1
    • Bearing Type: Dual Ball Bearing
    • Shaft size: 6mm (0.236”)
    • Net Weight: 330g (11.64oz)

    64 Tooth Gear (2 pack)

    #76221-2
    $24.99

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness: 6.35mm
    • Hole Diameter: 14mm
    • Number of teeth: 64
    • Step File

    6mm Shaft Hub (4 pack)

    #76284-4
    $9.99

    The 6mm Shaft hub is used to connect any Studica wheel and the Studica motor or any motor with a 6mm shaft.

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm ID
    • Hole pattern for connecting to structure
    • Step File

    6mm XL Pulley, 10 Tooth (2 pack)

    #76232-2
    $12.99

    Used with Maverick DC Motor with 6mm shaft and all 6mm D-Shaft Axels. Matching belt 10mm Timing Belt, # 76233.

    Specifications:

    • 10 Tooth Timing Pulley
    • 6mm Bore 
    • material: 6061 T6 Aluminum
    • Step File

    75mm Drive Wheel 60A 12.5mm wide 1/2" Inner Hex Black

    #76271
    $6.99

    The 75mm Drive Wheel can be used as a simple wheel providing good traction on carpet and tile flooring. They can also be used for intake systems.

    Use with 1/2" hex shaft of use 6mm Shaft Hub to use connect 6mm D-Shaft Axles.

    Specifications:

    • Diameter:   75mm
    • Axial width:  12.5mm 
    • Hub:  1/2" Inner Hex
    • Inner Material: Molded Plastic in Yellow
    • Outer Material: TPU Polyurethane in Black
    • Outer Material Durometer: 60A
    • Weight: 0.05kg
    • Step File

    90 Degree Bracket (2 pack)

    #76081-2
    $6.99

    The 90 Degree Bracket is perfect for connecting two channels pieces at 90 angle from each other. Each side is 48mm wide to fit perfectly on the channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

    90° Clamping Tube Hub

    #545368
    $7.20

    90° Clamping Tube Hub provides a great way to attach a 5/8” diameter tube or shaft to a ½" diameter hub. These clamping hubs have a 5/8" diameter bore for shaft connection, a ½" diameter bore for hub connection, four 6-32 tapped holes, four 6-32 through holes, two 6-32 machine screw for tightening, and utilizes the 0.77" hub pattern.

    90° Quad Hub Mount C

    #545360
    $4.79

    90° Quad Hub Mount C attaches directly to a robotics channel in multiple positions and are useful as attachment points for shafts and tubes with a 0.5" diameter and other hub mountable items. The model C type offers a wider base than the model B. Each hub mount has a 0.5" bore, a width of 1.3", and utilizes the 0.77" hub pattern.

    90rpm Micro Gearmotor

    #638106
    $8.00

    96mm Adjustable Flat Bracket (2 pack)

    #76083-2
    $5.49

    The Studica Adjustable Angle Flat Bracket is perfect for connecting two channels pieces together at various angles. It is 3mm thick and as with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 48mm
    • Length - 96mm
    • Step File

    96mm Flat Beam (2 pack)

    #76047-2
    $3.99

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 96mm
    • Step File

    96mm Square Beam

    #76107
    $3.99

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 96mm
    • Step File

    Aluminum Motor Mount B

    #555128
    $3.99

    Aluminum Motor Mount B connects to the outside of robotics channels and works with both standard and precisions gear motors. This allows you to drive shafts through channels, or even tubing. The mount utilizes various hole patterns for your motor, and a 1.5" hole pattern for connecting to other robotics products.

    Aluminum Motor Mount D

    #555132
    $3.99

    Aluminum Motor Mount D connects to the inside of robotics channels and works with both standard and precisions gear motors. This allows you to drive shafts through channels. The mount utilizes various hole patterns for your motor, and a 1.5" hole pattern for connecting to other robotics products.

    Articulated jaw for trailer coupling, red

    #38446
    $0.34
    38446: Articulated Jaw for Trailer Coupling

    Axle coupling, black

    #35073
    $0.17
    35073: Axle Coupling

    Ball Bearing Idler Shaft A

    #535194
    $3.46

    Ball Bearing Idler Shaft A includes a pre-installed bearing. It weighs 0.30 oz and measures 0.25" in diameter, 0.55" in height and 1.19" in length. This shaft is an ideal component for your robotic systems.

    Bracket Pack

    #70262
    $189.00

    Includes,

    • 3 - 120 Degree Bracket (2 pack)  76080-2
    • 2 - 90 Degree Bracket (2 pack)  76081-2
    • 2 - 135 Degree Bracket (2 pack)  76082-2
    • 2 - 96mm Adjustable Flat Bracket (2 pack)  76083-2
    • 1 - T Bracket (2 pack)  76084-2
    • 1 - X Bracket (2 pack)  76085-2
    • 4 - Inside U Bracket (2 pack)  76086-2
    • 4 - L Bracket (2 pack)  76087-2
    • 4 - Inside L Bracket (2 pack)  76089-2

    Bronze Bushing 6mm ID x 14mm OD (12 pack)

    #76301-12
    $22.99

    The Bronze Bushing 6mm ID x 14mm OD fits any of the channel and flat brackets having the common center hole pattern of 14mm. The inside diameter will fit any of the D-Shaft axels.

    Material:  bronze
    Inside Diameter: 6 mm
    Outside Diameter: 14 mm

    Clamping Swivel Motor Mounts - 22mm

    #555148
    $4.79

    Clamping Swivel Motor Mounts come in 3 sizes (22, 32 and 37mm ID). These motor mounts are extremely versatile and can easily attach to other robotics components. To adjust the height of the motor, simply loosen the pinch bolt found on the clamping swivel motor mount and slide the motor body to the desired position. These motor mounts are constructed of 6061 T-6 aluminum.

    Coupling 30, red

    #38260
    $0.34
    38260: Coupling 30

    Coupling, red

    #38253
    $0.34
    38253: Coupling 2

    Electronic Motor Action Kit

    #MX-510M
    $11.61

    Build your own electric powered MOTOR KIT. Control mixing with rotating color disc. Easy to read operating manual. Requires two AA batteries. Ages 8 & Up.


    Electronics Mounting Plate for Workshop

    #71015
    $10.99

    End Piece Plate (2 pack)

    #76143-2
    $9.99

    The Studica End Piece Plate is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    Fastener pack

    #70258
    $383.46

    Includes,

    • 2 - M3 x 8mm Socket Head Cap Screw (pack of 100)  76200-100
    • 2 - M3 x 10mm Socket Head Cap Screw (pack of 100)  76201-100
    • 2 - M3 x 12mm Socket Head Cap Screw (pack of 100)  76202-100
    • 2 - M3 x 10mm Button Head Cap Screw (pack of 50)  76203-50
    • 3 - M3 Kep Nut (pack of 100)  76204-100
    • 2 - M3 Nyloc Nut (pack of 100)  76205-100
    • 1 - M3 x 30mm Socket Head Cap Screw (pack of 50)  76206-50
    • 1 - M3 x 20mm Socket Head Cap Screw (pack of 50)  76209-50
    • 1 - 2.5mm Hex Ball End Screwdriver  70142
    • 1 - Combination Wrench 5.5mm  70145

    Flanged Ball Bearing 6mm ID, 14mm OD, 15mm FOD (12 pack)

    #76302-12
    $17.99

    The Flange Bearing 14mm OD fits any of the channel and flat brackets with the common hole pattern having a center hole of 14mm. The inside diameter will fit any of the D-Shaft axels.

    • Quantity: 1 or 12
    • Material: AISI440C stainless steel
    • Sealed Type: ZZ metal shields
    • Precision: ABEC-3
    • Clearance: C0
    • Lubrication:Kyodo SRL Grease
    • ID (inner diameter)/Bore:6 mm
    • OD (outer diameter): 14 mm
    • OD of Flanged Size: 15 mm
    • Width: 5 mm
    • Thickness of Flange: 1 mm
    • Step File

    Flanged Ball Bearings - 1/4"ID x 3/8"OD

    #535042
    $2.34

    Flanged Ball Bearings are perfect for all robotic channels, hub mounts, or holes that require you to run shafts through. Each order is sold in packs of two. Available in varying sizes.

    Futaba Lightweight Hub Horn

    #525125
    $3.19

    Futaba Lightweight Hub Horn are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your 3F Futaba servo spline. These aluminum servo hubs have a diameter of 1”, a width of 0.17”, and utilize the 0.77” hub pattern.

    Gear Pack

    #70261
    $175.00

    Includes,

    • 3 - 32 Tooth Gear (2 pack)  76220-2
    • 3 - 64 Tooth Gear (2 pack)  76221-2
    • 2 - 128 Tooth Gear  76222
    • 4 - 6mm Shaft Hub (4 pack)  76284-4
    • 1 - M3 x 12mm Socket Head Cap Screw (pack of 100)  76202-100

    Hitec Servo Shaft Hub (.500")

    #525122
    $8.00

    Hitec Servo Shaft Hub (.500") are perfect for running a hub through a ServoBlock Kit that is directly to your C1 Hitec servo spline. These aluminum servo hubs have a length of 1”, a hub diameter of 1”, a shaft diameter of 0.5”, and utilize the 0.77” hub pattern.

    Hitec Standard Hub Horn

    #525130
    $3.99

    Hitec Standard Hub Horn are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your C1 Hitec servo spline. These aluminum servo hubs have a diameter of 1”, a width of 0.25”, and utilize the 0.77” hub pattern.

    Lightweight Set Screw Hub (3mm Bore)

    #545348
    $5.60

    Lightweight Set Screw Hub (3mm Bore) offers 4 equally spaced 6-32 tapped holes and 4 equally spaced 0.14” thru holes. This hub is precision machined from 6061 T6 aluminum. The included set-screw is 6-32 and uses a 1/16” hex key.

    M3 Kep Nut (pack of 100)

    #76204-100
    $9.99

    M3 Nyloc Nut (pack of 100)

    #76205-100
    $8.99

    M3 x 10mm Button Head Cap Screw (50 pack)

    #76203-50
    $8.99

    M3 x 10mm Button Head Cap Screw (pack of 50), Zinc Plated.