Main Categories


    View as Grid List
    Sort by
    Display per page

    5mm Hex Shaft Hub Kit


    This Hub allows user that have existing Studica OMNI wheels (Part# 76260) or Mecanum Wheels (Part# 76243) to use REV Robotics 5mm Hex shafts and Hex Motors.


    6mm Servo Hub 25T


    The 6mm Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a D-Shaft axel.

    Cobra Line Follower Sensor


    The Cobra Line Follower Array provides 4 X QRE1113 IR reflectance sensor mounted on a 9mm pitch Each sensor is comprised of two parts - an IR emitting LED and an IR sensitive phototransistor. When you apply power to the VCC and GND pins the IR LED inside the sensor will illuminate.

    The Studica Line Sensor Board consists of 4 IR LED/phototransistor pairs, making it a great detector for a line-following robot.  The Line Sensor Board allows the robot to tell objects or surfaces apart based on how dark or light they are. It shines a beam of infrared light out onto the object, and measures how much light is reflected back.

    Each sensor provides a separate analog voltage output. The sensor board is an infrared emitter/receiver that is able to differentiate between a dark surface (with low IR reflectivity – 3.3V to 5V) and a light surface (with high IR reflectivity – 0V to 0.5V). However, this range can vary depended on the installed height of the sensor board. 

    The optimum height distance is 3-5 mm; however, the reflectivity values will change depending on distance. A daylight filter is built into the sensor.

    • 5VDC operating voltage (recommended)
    • 70mA supply current
    • Optimal sensing distance: 0.125" (3mm)
    • Step File

    FTC Drive Base Kit


    The FTC Drive Base Kit is available for FIRST teams only. This special offer is only available for a limited time and to qualify you must provide us with your FTC team name and number. This drive base kit when purchased individually is valued at $389 USD.


    Note: You can use any FIRST legal motor with this set.

    FTC Starter Kit


    FTC Starter Kit offers the ability to create up to three different basic bot designs by Studica.

    The 2021 Starter Kit features many products to allow for a competitive robot to be built by a team. 

    • U-Channel
    • Low Profile U-Channel
    • Flat Beams
    • Square Beams
    • Flats
    • Brackets
    • Mounts for Motors and Servos
    • Axles
    • Rack & Pinion
    • Linear Slide
    • Standoffs
    • Assortment of Screws and Nuts
    • Gears
    • Pulleys 
    • Belts
    • Wheels
    • Bushings
    • Bearings
    • Couplings
    • Collars
    • Spacers
    • High-resolution encoders
    • Servos
    • Tools
    • Storage Bin

    Linear RC Actuator 140mm 200N


    Coming soon!

    The Linear RC Actuator 140mm 200N is a new Servo motor which has a stroke of 140mm, a force of 200N

    Linear RC Actuator 140mm 50N


    Coming soon!

    The Linear RC Actuator 140mm 50N is a new Servo motor which has a stroke of 140mm, a force of 50N

    Linear RC Actuator 50mm 200N


    Linear RC Actuator 50mm 50N


    Coming soon!

    The Linear RC Actuator 50mm 50N has a stroke of 50mm, a force of 50N

    Maverick DC Gear Motor 60:1 w/Encoder


    The Maverick 12V DC Gear Motor 60:1 w/Encoder was designed for strength to endure competitions, providing a stall torque of 65 min. kgf-cm.


    • Voltage:                        12 volts
    • Length:                         127.5mm
    • Gear Ratios:                 60:1
    • Axel diameter:             6mm D-Shaft
    • Diameter:                     37mm
    • Stall Torque:                 65 min. kgf-cm (902 oz-in)
    • RPM:                               100
    • Encoder:                        high-resolution Hall effect, 12ppr, total count 732 per shaft rotation
    • Weight:                          0.33kgs
    • Power cable:                 PP45, 45cm, 14AWG
    • Encoder Cable:             45cm, 22AWG
    • Step File

    Motor Mount Clamp Kit


    Use the Motor Mount Clamp kit when fastening motors on body and attaching kit to channel and other structure.


    Motor Mount Plate


    The Motor Mount Plate is used with the Maverick 12V DC Gear Motor  (Part# 75001) to attach it inside the anyone of the U Channels 76010 to 76018. This is an example of a chassis with 4 motors mounted inside the U-Channel using a Motor Mounting Plate.





    Motor Mount Plate Leaf


    Motor Pack



    • 4 - Maverick 12V DC Gear Motor w/Encoder  75001
    • 4 - Motor Mount Plate  76140
    • 4 - Motor Mount Clamp Kit  76141
    • 1 - M3 x 10mm Button Head Cap Screw (pack of 50)  76203-50

    Multi-Mode Smart Servo


    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  


    Type:                             Metal Brush Motor
    Horn Gear Spline:       25T (5.9mm)
    Size:                               40mm x 20.1mm x 38.3mm
    Weight:                          65g
    Maximum Speed:        62RPM at 6V
    Stall Torque:        at 6V
    Voltage:                         6-7 4V
    Cable:                             22AWG, 75cm

    Robot Base Plate (288mm x 336mm x 3mm)


    The Studica Robot Base Plate is 3mm thick and as with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.


    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 288mm
    • Length - 336mm
    • Step File

    Servo Mount Flat Plate


    The Servo Mount Flat Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.


    Servo Mount Offset Plate


    The Servo Mount Offset Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.


    Servo Power Block


    The Studica Servo Power Module is a 6V, 60W power injector that enables the use of high-power RC servos. The Servo Power Module passes through input signals unaltered while providing up to 60W of total output power across all eight channels.  The input and output channels accept standard 3-wire, 0.1” pitch, servo/PWM cables. 


    • Built in DC-DC converter
    • Over-current shutdown
    • ESD protection


    • Nominal Input Voltage: 12V
    • Operational Voltage Range: 6.0V
    • Number of Channels: 8
    • Max Current for All Channels Combined: 10A
    • Total Continuous Power: 60W
    • Size: 70mm x 45mm x 16mm
    • Step File


    Shaft Coupling 6mm ID, 12mm OD (2 pack)


    Can be used with 6mm D-Shaft Axel and 6mm shaft DC motor. 



    • Material: 6061-T6 Aluminum
    • Inside Diameter: 6mm
    • Outside Diameter: 12mm
    • Step File

    Sharp IR Range Sensor (10cm to 80cm) w/wire


    The Sharp IR Distance Sensor GP2Y0A21YK0F uses a beam of infrared light to reflect off an object to measure its distance. Because it uses triangulation of the beam of light to calculate the distance, it is able to provide consistent and reliable readings which are less sensitive to temperature variation or the object’s reflectivity. The sensor outputs an analog voltage corresponding to the distance of the object, and can easily be read using an inexpensive analog to digital converter (ADC) chip.

    Ultrasonic Distance Sensor

    • Stable, accurate distance measurement
    • High precision, blind spots (3cm) super close
    • A full set of ranging process
    • Step File

    WorldSkills Mobile Robotics Collection Shanghai 2022

    Request a Quote

    The WorldSkills Mobile Robotics Collection – Shanghai 2022 by Studica is the authorized collection for the WorldSkills Mobile Robotics Competition. Featuring the Studica VMX Robotics Controller for WorldSkills, the Titan Quad Motor Controller and Servo Power Block. This comprehensive Collection also includes electronics, accessories, motors, servos, mounts, U-Channel, mounting plates, flat brackets, irregular brackets, and flat beams. You'll also find gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. Includes Everything You Need (Over 1500 components).

    Download brochure and BOM

    WorldSkills Mobile Robotics Workshop Kit 2021

    Request a Quote

    The WorldSkills Mobile Robotics VMX/Titan Workshop Kit is used in the classroom for teaching, testing and doing research in mobile robotics. It includes each the essential components and is referenced in the WorldSkills Mobile Robotics Shanghai 2022 training material.