Close
Main Categories
    Filters
    Preferences
    Search

    Makeblock

    Makeblock | Robotic Components for Makers Everywhere

    Join the Makerspace revolution! Studica offers makers, students, educators, and hobbyists the versatile Makeblock kits and components they need. Makeblock is an open-source construction platform ready to help you make your ideas reality! Don't be intimidated by technology. The Makeblock catalogue offers makers of every experience level robotic and electronic solutions that are accessible and easy to use. Developed based on competitive standards, Makeblock components meet the requirements for all FIRST projects and other robotic competition events.

     

    View as Grid List
    Sort by
    Display per page

    Countersunk Screw M3*10 - Pack of 10

    #70520
    $3.99
    Countersunk Screw is designed for the users who don't want the head of screw appears. Please use it with d=3mm cross screwdriver. Suitable for the structures with 3mm holes.

    IR Controller V2

    #13620
    $3.99
    The IR controller is designed to wirelessly control robots and other mechanical device. Working with many common IR receiver, this IR controller provides you a simple and easy way to control your devices without touching it

    Lead Screw (256mm) & Brass Flange Nut

    #84050
    $19.99

    Makeblock T6 L256mm Lead Screw and Brass Flange Nut Set can be self-locking, it is suitable for high torque requirements of transmission, such as the aixs for 3D printer. The lead screw also can carry larger load than the threaded rod.


    Features:

    • The lead screw is made of the stainless steel, and the flange nut is made of brass
    • Lead screw diameter: 6mm,  pitch: 2mm, length:256mm
    • Lead screw diameter: 6mm,  pitch: 2mm, length:13mm
    • The set can be self-locking
       

    Part List:

    • 1 × T6 L256mm lead screw
    • 1 × T6 Brass Flange Nut

     

    Makeblock 04C 10T Sprocket

    #83700
    $3.99

    The chain can be used together with the sprocket for transmission of motion and power. Compared with synchronous belt, the chain can transmit more force and drive large load.  

    • It is made of integrated steel, capable of bearing large strength.
    • Through M5x5 of jackbolt, it can firmly combine with 8mm of D-shaped shaft. 
    • By surface blackening, it can prevent rusting and increasing rigidity.
    • Type: Shaft
    • Material: Steel 
    • Inner diameter: 8 mm 

    Makeblock 04C 20T Sprocket

    #83702
    $5.58

    The chain can be used together with the sprocket for transmission of motion and power. Compared with synchronous belt, the chain can transmit more force and drive large load.  

    Features:

    • It is made of integrated steel, capable of bearing large strength.
    • Through M5x5 of jackbolt, it can firmly combine with 8mm of D-shaped shaft. 
    • By surface blackening, it can prevent rusting and increasing rigidity.

    Specifications:

    • Type: Shaft
    • Material: Steel 
    • Inner diameter: 8 mm 

    Makeblock 04C Roller Chain - 1.5m

    #83740
    $5.66

    The chain can be used together with the sprocket for transmission of motion and power. Compared with synchronous belt, the chain can transmit more force and drive large load. During actual operation, the chain can be tailored and pieced up according to actual needs. 

     

    Features:

    • made of steel, strong and capable of bearing large strength.
    • can be tailored and pieced up for all conditions. 

     

    Specifications:

    • Material: Steel 
    • Length: 1.5 m (It can be tailored and pieced up) 
    • Outer width: 9 mm 
    • Inner width: 3 mm

    Makeblock 2.4G Wireless Serial for mBot

    #13030
    $15.98

    The Makeblock 2.4G Wireless Serial was designed for Makeblock mBots to be used in classroom or workshop allowing people use wireless communication simultaneously. It uses the same the technology as wireless mouse. With the feature of no pairing needed and no drivers needed, there is no signal interference when many modules work simultaneously. With two parts included: a dongle to plug on your computer; a module to plug on the mCore, you can easily establish a wireless connection between the software mBlock and mBot.

    Makeblock 25mm DC Motor Pack - Blue

    #95010
    $17.58
    A 25mm diameter DC metal geared motor, together with a motor bracket, a shaft connector and a multipurpose wheel. The multipurpose wheel included can be used as a timing pully, or a wheel hub, or a tank wheel.

    Makeblock 36 DC Geared Motor 12V/240RPM

    #80501
    $49.65

    Description:

    36mm planetary gear reducing motor have better performance, higher torque. It can be used as the power motor of carts chassis or some high-performance small cars.

    Specification:

    • Voltage: 12V
    • No Load RPM: 240 RPM
    • Rated RPM: 182rpm
    • Rated torque: 4kg.cm
    • Current: 1.2A

    Makeblock 36mm Motor Bracket

    #61808
    $3.99

    Makeblock 36mm Motor Bracket is specifically designed to attach the 36mm DC Motor to your maker project. Made with durability and versatility in mind, this bracket is made from aluminum alloy that is 3mm thick. The u-shape design gives it more strength for reliable use.

    Makeblock 3D Printer nozzle Bracket A. While Supplies Last

    #62414
    $3.99

    Makeblock 3D Printer nozzle Bracket A is designed specially for use as the bracket for a 3D Printer nozzle. This component is made from 6061 aluminum with a design for proper mounting and room for the nozzle extrusion. It has a high load capacity and is easy to mount.

    Makeblock 42BYG Geared Stepper Motor

    #80502
    $42.56

    Makeblock 42BYG geared stepper motor is a simple, but very powerful stepper motor with high output torque and response speed but low noise and energy consumptionhas better performance.

    It comes with higher torque than 42BYG stepper motor. It can be used as the power motor of some high-performance machine.

    Specification:

    • Step Angle (degrees) :1.8
    • Phase Current: 2.8A
    • Wire Number: 4
    • Motor Length: 56mm
    • Ratio: 5.18:1
    • Output Shaft: D shaft 8mm

    Makeblock 42BYG Stepper Motor Bracket B-Blue

    #62003
    $5.58
    The Makeblock 42BYG Stepper Motor Bracket B has the same function as 42BYG Stepper Motor Bracket. It comes with a width of 40mm to adapt to your DIY project.

    Makeblock 42BYG Through-type Lead Screw Stepper Motor

    #81062
    $44.69

    Makeblock 42BYG Through-type Lead Screw Stepper Motor is a special linear stepper motor equipped with a 312mm long T8 lead screw. The motion of the motor will be along a straight line when the T8 lead screw is meshing with the screw thread inside the motor.                                                                             

    When the lead screw is fixed, the motor will achieve a linear motion which will simplify the XY style motion structure. When the motor is fixed, the lead screw will start a linear motion, for instance, a pull-out structure created by the lead screw working with a cylinder.                                                                          

    42BYG Through-type Lead Screw Stepper Motor is widely used in all projects that require a high-precision motion.

     

    Features:

    • High-precision linear motion;
    • Simple structure and multi-function;

     

    Specification:

    • Phase Number: 2;
    • Wire Number: 4;
    • Screw Lead: 2mm;
    • Step Angle: 1.8°;
    • Rated Current: 1.5A;
    • Rotor Rotational Inertia:  57g.cm²;
    • Insulation Class: B.

    Makeblock 4mm Diameter Straight Throttle Valve - 2-Pack

    #59014
    $9.49
    The Makeblock ?4 straight throttle valve is a flow control valve of straight-through type which is used for reducing and controlling the flow rate, regulated by hand and can be locked and closed completely.

    Makeblock 57BYG Stepper Motor Bracket - Pair in Black

    #62040
    $5.32
    The Makeblock 57BYG Stepper Motor Bracket can be used as the structural support or connection point for Makeblock 57BYG Stepper Motor.

    Makeblock 6mm - 4mm Dia Reducing Straight Connector - (4-Pack)

    #59012
    $3.99

    One end is used with ?6 air pipe and the other end with ?4 air pipe. The channel is of straight-through type and reduces the ?6 air pipe to ?4 air pipe.

     

    Features:

    • Reduce the 8mm air pipe to 6mm diameter air pipe.

    Makeblock 6P6C RJ25 Cable - 20cm

    #14202
    $3.99
    This Makeblock 6P6C RJ25 Cable is compatible with Makeblock electronic modules.

    Makeblock 6P6C RJ25 Cable - 50cm

    #14206
    $3.99
    This Makeblock 6P6C RJ25 Cable is compatible with Makeblock electronic modules.

    Makeblock 820 Coreless Motor - Pair

    #81300
    $5.66

    Makeblock 820 Coreless Motor has both the  positive pitch and the negative pitch, it is usually used in the four-axis aircraft.

     

    Fetures:

    • High torque
    • Low weight and small volume
    • Low energy consumption
    • High speed

    Specification:

    • Motor diameter: 8.5 mm
    • Motor Length: 20 mm
    • Output shaft: 1.0 mm
    • Output shaft length: 5 mm
    • Pigtail cable: 5cm
    • Weight: 6.5 g
    • Voltage: 3 V-5V
    • Current: 0.15 A

    Speed:

    • 3V: 35000-37000 RPM
    • 5V: about 50000 RPM

    Makeblock 8mm Diameter to 6mm Diameter Reducing Straight Connector - 4-Pack

    #59011
    $3.99
    The Makeblock ?8 - ?6 reducing straight connector's one end is used with ?8 air pipe and the other end with ?6 air pipe. The channel is of straight-through type and reduces the ?8 air pipe to ?6 air pipe.

    Makeblock Air Pump Motor - DC 12V/370-02PM

    #50000
    $8.78
    Makeblock air pump motor - DC 12V/370-02PM is widely used for aquarium tank oxygen circulate, a DIY project to fit your needs.

    Makeblock Air Pump Motor DC 12V/3202PM

    #50001
    $5.66

    Makeblock air pump motor - DC 12V/3202PM is widely used for aquarium tank oxygen circulate, it can also be used for a DIY project that you dream up.

    Makeblock Airblock Drone

    #99808
    $96.75

    The Makeblock Airblock is made up of 1 core master module, and 6 power modules. Connect them magnetically to quickly build an aircraft, a hovercraft or a variety of other DIY configurations With Makeblock software, children can get started quickly. Whilst they play, they’ll learn block-based programming, the principles of aerodynamics, exercise logic and use their critical thinking skills.

    Makeblock Base Bracket B

    #14403
    $3.99
    The Makeblock Base Bracket B is a multi-purpose bracket which can be used for Arduino, Meduino, Me BaseBoard, as a Battery Holder, and even Raspberry Pi. Base Bracket B is bigger than Base Bracket A and has more holes to connect with electronic boards and mechanical parts. Additionally, the two biggest holes in the bracket will allow the RJ25 cables to go through.

    Makeblock Beam 0412 - 172mm Long

    #60719
    $4.22

    Makeblock Beam0412's are the most frequently used parts of Makeblock platform, used to build all kinds of mechanical structures. The Beam0412 series is usually applied as linking-rod parts and comes with different length varying from 36mm to 236mm.

    Makeblock Beam 0412 - 188mm L2-R1

    #60722
    $5.58

    Makeblock Beam0412's are the most frequently used parts of Makeblock platform, used to build all kinds of mechanical structures. The Beam0412 series is usually applied as linking-rod parts and comes with different length varying from 36mm to 236mm.

    Makeblock Beam 0412 - 236mm Long

    #60727
    $6.39

    Makeblock Beam0412's are the most frequently used parts of Makeblock platform, used to build all kinds of mechanical structures. The Beam0412 series is usually applied as linking-rod parts and comes with different length varying from 36mm to 236mm.

    Makeblock Beam 0412 - 36mm Long

    #60701
    $3.51

    Makeblock Beam0412's are the most frequently used parts of Makeblock platform, used to build all kinds of mechanical structures. The Beam0412 series is usually applied as linking-rod parts and comes with different length varying from 36mm to 236mm.

    Makeblock Beam 0412 - 44mm Long

    #60703
    $3.99

    Makeblock Beam0412's are the most frequently used parts of Makeblock platform, used to build all kinds of mechanical structures. The Beam0412 series is usually applied as linking-rod parts and comes with different length varying from 36mm to 236mm.

    Makeblock Beam 0412 - 60mm Long

    #60705
    $3.51

    Makeblock Beam0412's are the most frequently used parts of Makeblock platform, used to build all kinds of mechanical structures. The Beam0412 series is usually applied as linking-rod parts and comes with different length varying from 36mm to 236mm.

    Makeblock Beam 0412 - 92mm Long

    #60709
    $3.51

    Makeblock Beam0412's are the most frequently used parts of Makeblock platform, used to build all kinds of mechanical structures. The Beam0412 series is usually applied as linking-rod parts and comes with different length varying from 36mm to 236mm.

    Makeblock Beam 0808 - 104mm Long

    #60524
    $7.19

    Makeblock Beam0808's are frequently used parts within the Makeblock platform to build all kinds of mechanical structures. The Beam0808 series is a reliable structural component, available in varying lengths from 24mm to 504mm.

    Makeblock Beam 0808 - 120mm Long

    #60528
    $7.19

    Makeblock Beam0808's are frequently used parts within the Makeblock platform to build all kinds of mechanical structures. The Beam0808 series is a reliable structural component, available in varying lengths from 24mm to 504mm.

    Makeblock Beam 0808 - 136mm Long

    #60532
    $8.78

    Makeblock Beam0808's are frequently used parts within the Makeblock platform to build all kinds of mechanical structures. The Beam0808 series is a reliable structural component, available in varying lengths from 24mm to 504mm.

    Makeblock Beam 0808 - 168mm Long

    #60540
    $10.99

    Makeblock Beam0808's are frequently used parts within the Makeblock platform to build all kinds of mechanical structures. The Beam0808 series is a reliable structural component, available in varying lengths from 24mm to 504mm.

    Makeblock Beam 0808 - 24mm Long

    #60504
    $3.99

    Makeblock Beam0808's are frequently used parts within the Makeblock platform to build all kinds of mechanical structures. The Beam0808 series is a reliable structural component, available in varying lengths from 24mm to 504mm.

    Makeblock Beam 0808 - 40mm Long, Version B

    #60510
    $4.78

    Makeblock Beam0808's are frequently used parts within the Makeblock platform to build all kinds of mechanical structures. The Beam0808 series is a reliable structural component, available in varying lengths from 24mm to 504mm.

    Makeblock Beam 0808 - 56mm Long

    #60512
    $4.78

    Makeblock Beam0808's are frequently used parts within the Makeblock platform to build all kinds of mechanical structures. The Beam0808 series is a reliable structural component, available in varying lengths from 24mm to 504mm.

    Makeblock Beam0808-040-A - Blue (4-Pack)

    #60508
    $3.51

    Makeblock Beam0808-040-A is one of the most frequently used parts in the Makeblock platform. These larger beams are crucial for the construction of your maker design. They are compatible with most Makeblock motion and structure components.

    Makeblock Beam0808-072 - Blue (4-Pack)

    #60516
    $5.58

    Makeblock Beam0808-072 is one of the most frequently used parts in the Makeblock platform. These beams are essential for the construction of your maker design with a length of 72 mm. They are compatible with most Makeblock motion and structure components.

    Makeblock Belt Connector B -

    #83092
    $4.78

    Belt Connector B provides a simple way to clamp open-end timing belts. Mating with some clamping parts, you can  use a open-end timing belts more flexible for example using in the belt system of the 3D printer.

    Features:

    • Made from 6061 aluminum extrusion, high precision and strength
    • Compatible with Makeblock components

    Makeblock Belt Connector-Blue - Pair

    #83090
    $3.99

    In most cases ,when you buy some timing belts on the market, it is always not the size which you want or fixing open-end timing beltsis a big problem. Makeblock Belt connector can solve the problem. Belt Connector is usually used to fix open-end timing belt(width <=8mm) together when you use timing belt to build  transmission.

    Features:

    • Connect open-end timing belt together easily
    • Eight M4 mounting holes compatible with most Makblock components
    • Aluminum extrusion(high strength) , 3mm thick, anodized surface(long time to shelve with barely rusting)

    Makeblock Bracket L1 - Blue (Pair)

    #61512
    $3.99

    Makeblock Bracket L1 is an important fastener, used to reinforce right angle corner joints. These specially designed brackets help create connections within your maker project. They are compatible with most Makeblock motion and structural parts.

    Makeblock Bracket P1 - Blue (Pair)

    #62400
    $3.99

    Makeblock Bracket P1 is a convenient fastener. These specially designed brackets help create connections within your maker project. They are compatible with most Makeblock motion and structural parts.

    Makeblock Bracket P3 - Blue (Pair)

    #62404
    $3.99

    Makeblock Bracket P3 is a convenient fastener with more surface area to fit on various components. These specially designed brackets help create connections within your maker project. They are compatible with most Makeblock motion and structural parts.

    Makeblock Bracket Robot Pack - Blue

    #95045
    $22.99
    The Makeblock Bracket Robot Pack contains most frequently used brackets and plates in Makeblock platform, which you can use to make special constructions.

    Makeblock Bracket U1 - Blue (Pair)

    #61516
    $3.99

    Makeblock Bracket U1 is commonly used as a structural support and/or a connection point for servos, motors and shafts. These specially designed brackets help create connections within your maker project. They are compatible with most Makeblock motion and structural parts.