Close
Main Categories
    Filters
    Preferences
    Search

    Industry

    View as Grid List
    Sort by
    Display per page

    Pantone® Essentials

    #GPG301A
    $662.00

    Pantone Essentials contains some of Pantone's most popular solid, solid-to-process and process-only colors. It is the perfect starter set for designers, pre-press professionals and printers. Pantone Essentials offers colors for communication and matching on press, conveniently at your fingertips!

    This bundle includes:

    • Pantone® Formula Guide Solid Coated
    • Pantone® Formula Guide Solid Uncoated
    • Pantone® Color Bridge Coated
    • Pantone® Color Bridge Uncoated
    • Pantone® CMYK Coated
    • Pantone® CMYK Uncoated

    Pantone® Plastics Tints and Tones Collection - For Commercial Users

    #PTTC100
    $1030.00

    PANTONE Plastic Standard Chips allow precise color specification and matching of every color in the PANTONE PLUS SERIES and FASHION + HOME Color System. Plastic Standard chips provide maximum creativity and control in the development of plastic products, including; consumer electronics, home furnishings, appliances, accessories and more, across multiple plastic substrates.

    Pantone® Smart Color Swatch Card in TCX Colors - Single Card (Please specify color code in order)

    #SWCD TCX
    $13.00

    Developing color palettes and insuring the right color from inspiration to final product has never been easier. Use these 4"x 4" cotton color standard cards to accurately specify colors and build palettes for textiles and apparel using the PANTONE FASHION, HOME + INTERIORS Color System.
    Eliminate guesswork: Consistent, reproducible color.

    • Use SMART Color Swatches to specify PANTONE Colors for apparel and textile dyeing
    • All 2,310 colors available as cotton fabric swatches with a TCX number suffix
    • Double-layered 4" x 4" cotton swatch unfolds to 4" x 8" for optimum color visualization and evaluation
    • Each individual color swatch card is identified with four PANTONE Color name and number strips and is large enough to be cut and sent to multiple locations

    pH Sensor

    #PH-BTA
    $99.41

    Use the pH Sensor just as you would a traditional pH meter with the additional advantages of automated data collection, graphing, and data analysis. Typical activities using our pH sensor include:

    • Acid-base titrations
    • Studies of household acids and bases
    • Monitoring pH change during chemical reactions or in an aquarium as a result of photosynthesis
    • Investigations of acid rain and buffering
    • Analysis of water quality in streams and lakes

    PmodALS: Ambient Light Sensor

    #410-286
    $9.99

    The Digilent PmodALS demonstrates light-to-digital sensing through a single ambient light sensor. Digilent Engineers designed this Pmod around Texas Instrument's ADC081S021 analog-to-digital converter and Vishay Semiconductor's TEMT6000X01.

    Powerpole Crimp Tool 15, 30, 45

    #70143
    $37.99

    ThePowerpole Crimp Tool 15, 30, 45 crimping tool provides a positive crimp on the 15, 30 & 45 amp contacts manufactured by Anderson Power Products for the Powerpole® line of products. It has the following features.

    Specifications:

    • Crimps all three sizes of Powerpole® contacts; 15, 30 and 45 amp
    • Built-in contact positioner that holds the contact during crimping
    • Ratchet mechanism assures proper crimps every time
    • Far faster and better than soldering
    • Provides the highest strength and the lowest resistance connections possible
    • Dimensions: 7.75" X 3" X 1.5"
    • Weight: 20 ounces
    • High Contact retention force

    Contacts & Jaw Position

    The 3 contacts have different amp ratings:

    • 15 Amp (SKU: 1332) is designed to receive 16, 18 and 20 gauge wire.
    • 30 Amp (SKU: 1331) is designed to receive 12, 14 gauge wire.
    • 45 Amp (SKU: 261G2) is designed to receive 10 gauge wire.

    The contact size corresponds to the position marking on the die. The 15 amp contact goes into the 15 amp position, the 30 amp into the 30 position, and 45 amp into the 45 position.

    Assembly Instructions 15 & 30 Amp

    To crimp the 15 & 30 amp contacts it is recommended that you insert the wire into the contact prior to inserting them into the tool. Then, with the flat side of the contact down, insert the contact tip into the proper slot for crimping.

    Squeeze the ratchet handle until the ratchet mechanism releases. Do not over crimp by squeezing the handles together until they touch, it is possible to break the die.

    Assembly Instructions 45 Amp

    To crimp the 45 amp contact it is recommended that you position the tip of the 45 amp contact into the 45 amp position slot before the wire is inserted. Make sure the contact is properly positioned with the U (open contact) facing up. If the contact is lying sideways you may not obtain a proper crimp. Then, insert your wire into the inserted contact.

    Squeeze the ratchet handle until the ratchet mechanism releases. Do not over crimp by squeezing the handles together until they touch, it is possible to break the die.


    Read more: http://www.powerwerx.com/crimping-tools/tricrimp-crimping-powerpole-contacts.html#ixzz2YlrFRGU8

    Note: Only official tooling solutions recommended by APP may be acceptable for safety agency approvals such as UL, CSA and TUV. Official tooling solutions such as the 1309 series are available for purchase at a higher price. Read more: http://www.powerwerx.com/crimping-tools/tricrimp-crimping-powerpole-contacts.html#ixzz44INkWK9m

    Seeed Studio Grove - 80cm Infrared Proximity Sensor

    #SEN39046P
    $13.90

    The 80cm Infrared Proximity Sensor is a General Purpose Type Distance Measuring Sensors, this sensor takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80cm (30"). Can be used in TVs, personal computers ,cars and so on.

    Key Features:

    • Grove interface compatible
    • Wide supply voltage range: 2.5V–7V

    Seeed Studio Grove - Dust Sensor

    #SEN12291P
    $15.90
    Sensor is to create Digital (Lo Pulse) output to Particulate Matters (PM). Lo Pulse Occupancy time (LPO time) is in proportion to PM concentration. The output is for PM whose size is around 1 micro meter or larger. We can use the sensor to detect the dust in clean room.

    Seeed Studio Grove - Hall Sensor

    #SEN14034P
    $5.90

    The Hall Sensor measures the Hall Effect, which is a production of a voltage difference across an electrical conductor, transverse to an electric current in the conductor as well as a magnetic field perpendicular to the current. The output of the continuous-time switch Hall sensor on this Twig switches low and turns on when a magnetic field (south polarity) perpendicular to the Hall sensor exceeds the BOP threshold, and it switches high and turn on when the magnetic field disappears.

    Key Features:

    • Grove compatible interface
    • 400ns transition period for rise and fall.
    • Continuous-time hall effect sensor

    Application Ideas:

    • RPM meter.
    • Simple dc motor.

    Seeed Studio Grove - I2C Color Sensor

    #SEN60256P
    $19.90

    This module is based on the color sensor TCS3414CS with digital output I2C. Based on the 8*2 array of filtered photodiodes and 16-bits analog-to-digital converters, you can gain the color chromaticity of ambient light or the color of objects. Of the 16 photodiodes, 4 have red filters, 4 have green filters, 4 have blue filters and 4 have no filter(clear). With the synchronization input pin, external pulsed light source can provides precise synchronous conversion control.

    Key Features:

    • Grove compatible interface
    • 16-Bit digital output with I 2C at 400 kHz
    • SYNC Input Synchronizes Integration Cycle to Modulated Light Sources
    • Operating temperature range -40°C to 85°C
    • Programmable interrupt function with User-Defined Upper and lower threshold settings

    Seeed Studio Grove - PIR Motion Sensor

    #SEN32357P
    $7.95
    This is a simple to use PIR motion sensor with Grove compatible interface. Simply connect it to Stem shield and program it, when anyone moves in its detecting range, the sensor outputs HIGH on its SIG pin. The detecting range and response speed can be adjusted by 2 potentiometers soldered on its circuit board, The response speed is from 0.3s - 25s, and max 6 meters of detecting range.

    Seeed Studio Grove - Temp&Humi Sensor

    #SEN11301P
    $5.90

    This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity and the temperature is measured by a negative temperature coefficient (NTC) thermistor. It has excellent reliability and long term stability. Please note that this sensor will not work for temperatures below 0 degree.

    Features:

    • Relative Humidity and temperature measurement
    • Full range temperature compensation Calibrated
    • Digital signal Long term stability
    • Long transmission distance
    • Low power consumption

    Seeed Studio Grove - Temperature & Humidity Sensor -

    #101020074
    $11.50
    This is a multifunctional sensor that gives you temperature and relative humidity information at the same time. It utilizes a TH02 sensor that can meet measurement needs of general purposes. It provides reliable readings when environment humidity condition inbetween 0-80% RH, and temperature condition inbetween 0-70°C, covering needs in most home and daily applications that don't contain extreme conditions.

    Seeed Studio Grove - Water Sensor

    #SEN11304P
    $2.90

    This water sensor module is part of the Twig system. This sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sens traces. The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace. Believe it or not this circuit will work with the digital I/O pins of your Arduino or you can use it with the analog pins to detect the amount of water induced contact between the grounded and sensor traces.

    Features

    • Grove compatible interface
    • Low power consumption
    • 2.0cm x 2.0cm twig module
    • High sensitivity

    Applications Ideas

    • Rainfall detecting
    • Liquid leakage
    • Tank overflow detector

    Seeed Studio Xadow - UV Sensor

    #SEN07113P
    $12.90
    Xadow UV Sensor is suitable for measuring the UV radiation in sunlight. It can detect the UV wavelength of 290 ~ 400 nm. The UV Sensor is outputting digital voltage value corresponding to UV light intensity. With the diagram of output voltage and UV, we can easy to know the current UV index. The Xadow UV Sensor can be powered by 3.3V. And it is compatible with Xadow system.

    Shuttle Jog Controller

    #30616
    Request a Quote

    The Jog/Shuttle Controller is a human interface device to aid speedy and accurate manual positioning of the axes of the PCNC1100. It serves the role of the device often termed an Electronic Handwheel or MPG.

    Technician Tool Kit

    #TK-1001
    $63.10
    The Elenco Technician Tool Kit includes many handy tools and gives you plenty of room to add others.

    Telescopic Magnetic Pick-Up Tool

    #ST-45
    $5.08
    Telescopic (24 inch) Pick-Up Tool w/ Pocket Clip

    TinkerKit Hall Sensor module

    #T000070
    $6.82

    TinkerKit Hall Sensor module creates a voltage related to the magnetic field around the sensor. This can be used to detect distance from a nearby magnet. Hall sensors can also be used to detect the magnetic field induced in a wire or coil.

    TinkerKit Sensor Shield V.2

    #T020010
    $11.93

    TinkerKit Sensor Shield V.2 allows you to hook up the TinkerKit Sensors and Actuators directly to the Arduino without the use of the breadboard. It has 12 standard TinkerKit 3 pin connectors.

    TinkerKit Tilt Sensor module

    #T000190
    $4.01

    TinkerKit Tilt Sensor module can detect when it is at an angle. This module contains two contacts and a small metal ball. When the sensor is in its upright position, the ball bridges the two contacts, completing the circuit. When the board is tilted, the ball moves, and the circuit opens. When upright, the module outputs 5V and when it is tilted, it outputs 0V. When connected to an input on the Arduino using the TinkerKit Shield, you can expect to read a value of 1023 when in its upright position and 0 when it is titled.

    This module is sensor. The connector is an output, which must be connected to one of the input connectors on the TinkerKit Shield.

    Titan Quad Motor Controller

    #70152
    $399.00

    The Titan Quad Motor Controller is a powerful, 4-channel CAN-based motor controller with a built-in fuse-box (for DC motors up to 20A).

    Features:

     

    • 4 x Hardware encoder ports – one for each motor
    • 2 limit switch ports for each motor
    • Fuse box to set manual current limits
    • 2x Power extension ports to power other 12VDC devices. I.E.
      • VMX Robotics Controller
      • Servo Power Module
    • Built in LED Controller
    • 6A power supply for LED’s
    • i2c communication port to control LED Controller
    • USB ports are updated to USB-C to better support todays cable standards
    • Step File
       

    Toolkit Wires [100cm] module

    #T020080
    $2.00

    Toolkit Wires [100 cm] module are 100 cm long wires designed for TinkerKit with a 3 pin jumper on both sides to easily connect your TinkerKit products.

    Tormach 1100M CNC MILL - Entry Package

    #37752-EP
    Request a Quote

    The Tormach 1100M is a compact 3-axis CNC mill. The 1100M Entry Package has the basics that you will need to get started. This package includes mill, controller, and owners kit.