Close
Main Categories
    Filters
    Preferences
    Search

    Cables

    View as Grid List
    Sort by
    Display per page

    147264: Polybag w. 3x300mm+2x200mm cable w. mount. flat plugs

    #147264
    $36.11

    147264: Polybag w. 3x300mm+2x200mm cable w. mount. flat plugs

    34 pin MXP Extender Cable

    #70001EC
    $7.96

    Extend the reach of your MXP port by using this 8 inch cable to re-position you boards where you need them.

    Compatable with MXP accessory boards like the protoboard, RIOduino and myRIO.

    Features:

    • Keyed male and female 34-pin connectors
    • 28 AWG ribbon cable
    • 34 conductor
    • 8? length

    34 Pin MXP extender cable - 8 inch

    #69003
    $3.99

    Extend the reach of your MXP port by using this 8 inch cable to re-position you boards where you need them.

    Compatable with MXP accessory boards like the protoboard, RIOduino and myRIO.

    Features:

    • Keyed male and female 34-pin connectors
    • 28 AWG ribbon cable
    • 34 conductor
    • 8″ length

    6 Inch BNC to BNC Cable

    #FRI-2000-4B
    $8.95

    BITalino 1-lead sensor cable

    #ACCELCTRDCAB
    $11.00

    BITalino 1-lead sensor cable is an individual cable to connect the sensor pins (IN+, IN-, and REF) to the electrodes.

    Features:

    • Length: 40cm (others possible on request)
    • Sensor connector: Crimp pin (compatible with the individual pins on the Molex Sherlock male plug)
    • Electrode connector: Standard snap on socket

    Cable 1200, blue

    #32869
    $1.37
    32869: Cable 1200 MM

    Cable 2000, blue

    #31027
    $2.23

    Cable 600, blue

    #35039
    $0.86

    Cable 6000, blue

    #32846
    $4.47

    Cable winch brake, black

    #31999
    $0.52
    31999: Cable Winch Brake

    Cable winch drum, black

    #31998
    $0.52
    31998: Cable Winch Drum

    Cable winch drum, black

    #35070
    $0.69
    35070: Cable Winch Drum

    Cable winch frame 30, red

    #35069
    $0.86
    35069: Cable Winch Frame 30

    Cable winch frame, red

    #31997
    $0.69
    31997: Holder for Fiber Pen

    Classroom pack of Flexi-Cables for NXT/EV3 (10 cm x 25)

    #FLX010CPK
    Request a Quote

    Classroom pack of Flexi-Cables for NXT/EV3 (10 cm x 25) offers users ribbon-like cables that are both thin and flexible.

    • Includes NXT/EV3 compatible phone jack connectors
    • Pack of 25 cables, 10 cm each

    Classroom pack of Flexi-Cables for NXT/EV3 (20 cm x 25)

    #FLX020CPK
    Request a Quote

    Classroom pack of Flexi-Cables for NXT/EV3 (20 cm x 25) offers users ribbon-like cables that are both thin and flexible.

    • Includes NXT/EV3 compatible phone jack connectors
    • Pack of 25 cables, 20 cm each

    Classroom pack of Flexi-Cables for NXT/EV3 (35 cm x 25)

    #FLX035CPK
    Request a Quote

    Classroom pack of Flexi-Cables for NXT/EV3 (35 cm x 25) offers users ribbon-like cables that are both thin and flexible.

    • Includes NXT/EV3 compatible phone jack connectors
    • Pack of 25 cables, 35 cm each

    DC Power Plug 2.1mm ID x 5.5mm OD w/1m 18AWG cable

    #70016
    $3.49

    Ideal for the myRIO.

    • Inside Contact Diameter: 2.1mm
    • Outside Contact Diameter: 5.5mm
    • Termination Style: Solder Cup
    • Voltage Rating: 12 V
    • 6 Amp
    • 1 meter cord length
    • 18AWG or 20AWG wire guage
    • DC connector type

    Encoder cable 3ADR 600mm

    #168961
    $8.77

    Encodercable 3wire

    #137125
    $6.36
    137125: Encodercable

    Encodercable 4wire

    #119785
    $11.00

    Extender for NXT/EV3 Cables

    #Extender
    Request a Quote

    Extender for NXT/EV3 Cables is a kit used to connect two cables to increase effective length. This kit includes PCB and NXT compatible connnectors with assembly instructions - some soldering required.

    Extension cable 6-pole

    #135465
    $5.55

    Flexi-Cables for NXT (FLEX-Nx)

    #FLEX-Nx
    Request a Quote

    Flexi-Cables for NXT (FLEX-Nx) are thin, flexible cables intended for use with the NXT or EV3. These cables come with NXT/EV3 compatible phone jack connectors. This pack also includes four of the most commonly used cable sizes.

    • 1 cable: 20 cm (8 inches)
    • 2 cables: 35 cm (14 inches)
    • 1 cable: 50 cm (20 inches)

    Flexi-Cables for NXT 10cm x 3

    #FLX010x3
    Request a Quote

    Flexi-Cables for NXT 10cm x 3 are thin, flexible cables for use with NXT/EV3 controllers. This kit includes NXT/EV3 compatible phone jack connectors. Package of three cables, 10cm each.

    Flexi-Cables for NXT 20cm x 3

    #FLX020x3
    Request a Quote

    Flexi-Cables for NXT 20cm x 3 are thin, flexible cables for use with NXT/EV3 controllers. This kit includes NXT/EV3 compatible phone jack connectors. Package of three cables, 20cm each.

    Flexi-Cables for NXT 35cm x 3

    #FLX035x3
    Request a Quote

    Flexi-Cables for NXT 35cm x 3 are thin, flexible cables for use with NXT/EV3 controllers. This kit includes NXT/EV3 compatible phone jack connectors. Package of three cables, 35cm each.

    Mains cable UK plug, black

    #162605
    $29.25

    Mains cable US plug, black

    #161256
    $30.30

    Makeblock 6P6C RJ25 Cable - 20cm

    #14202
    $3.99
    This Makeblock 6P6C RJ25 Cable is compatible with Makeblock electronic modules.

    Makeblock 6P6C RJ25 Cable - 50cm

    #14206
    $3.99
    This Makeblock 6P6C RJ25 Cable is compatible with Makeblock electronic modules.

    Makeblock Shutter Cable C1 for Canon.

    #14225
    $5.58

    Shutter Cable C1 for Canon is the perfect cable for connecting your Canon SLR camera to the Me Shutter component. Great for use in your Arduino project. Connect one end to the Me Shutter Port and the other to the remote control terminal on your camera. It's as simple as that

    Makeblock USB 2.0 A-Male to Micro B-Male Cable

    #14221
    $3.99
    USB 2.0 A-Male to Micro B-Male Cable is a new, smaller connector for USB devices. It has been compatible with more and more open source hardware, such as Arduino Leonardo, Raspberry Pi and Beagle Bone, and it's also compatible with Makeblock Baseboard.

    Makeblock Versatile Cable with Stripped Ends - 50cm, 16AWG

    #14241
    $1.11
    Makeblock Versatile Cable with Stripped Ends (50cm, 16AWG) is generally used as a connecting wire in motor and pump products which require heavy current in Makeblock platform.

    Makeblock Versatile Cable with Stripped Ends - 35cm, 22AWG (Pair)

    #14240
    $3.80
    The Makeblock Versatile Cable with Stripped Ends can be used for Makeblock Air Pump Motor?Water Pump Motor and in a variety of DIY projects.

    Micro USB-cable

    #160540
    $18.18

    Mini-USB-Cable

    #134867
    $10.31
    134867: Mini USB Cable

    Powerpole 45 Extension Cable, 14AWG, 50cm

    #70021
    $9.99

    The Powerpole Extension Cable is 50cm long and 14AWG wire gauge to handle heavier loads.

    PWM cable Set - TJC8 3 pin, 22AWG, F-F - 12 pcs

    #71011
    $15.99

    This set of 12 pieces includes,

    • 2 x 20cm 22AWG Cables with Dupont TJC8 2.54mm 3 pin, female to female connectors
    • 2 x 40cm 22AWG Cables with Dupont TJC8 2.54mm 3 pin, female to female connectors
    • 2 x 60cm 22AWG Cables with Dupont TJC8 2.54mm 3 pin, female to female connectors
    • 6 x 3pin Dupont male to male connectors

    Reed contact and cable clamp, red

    #35969
    $0.34

    Seeed Studio Grove - Branch Cable for Servo - Pack of 5

    #ACC12159O
    $4.25
    USe this cable to connect two servo to Grove system with only 1 cable. Compatible with RB-421, MG-995, SG-90, SG-5010.

    Seeed Studio Grove - Universal 4 Pin 20cm Unbuckled Cable - Pack of 5

    #ACC11317O
    $2.90
    Compared with the Electronic Brick system, the Grove System uses only 1 type of cable, (the Electronic Brick system uses 4). These cables are compatible with all modules included in the Grove system.

    Seeed Studio Grove - Universal 4 Pin Buckled 5cm Cable - Pack of 5

    #ACC83054O
    $1.90
    The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 5cm,20cm,30cm,40cm,and 50cm cables for different applications.

    Seeed Studio Grove Conversion Cable - Pack of 5 (4 pin Female Jumper to Grove 4 pin)

    #ACC17112O
    $3.90
    With this wire, you can easily connect all of Seeed Grove modules to any 2.54mm pitch connectors. 5 PCs is included in one pack.Length of each wire is 20cm. Note: Grove side uses buckled connector.

    Short Length Flexi-Cables for NXT

    #FLXS-Nx
    Request a Quote

    Short Length Flexi-Cables for NXT are thin, flexible cables. These cables also include NXT/EV3 compatible phone jack connectors.

    • Pack of 4 short cables
      • 2 cables: 10 cm (4 inches)
      • 2 cables: 20 cm (8 inches)

    Tester for NXT Cables

    #NXTCableTester
    Request a Quote

    NXTCableTester can be used to verify your cables for connectivity or faults. This is particularly useful when you are crimping your own cables or reusing old cables.

    USB cable type A/B

    #A000045
    $1.84
    Standard USB 2.0 cable. Use it to connect Arduino Uno, Arduino Mega 2560, or any board with the USB female A port of your computer. Cable length is approximately 178cm.

    USB Cable, Type A to Type C, Blue, 2M

    #70186
    $5.99

    USB Cable, Type A to Type C, Blue, 2 Meters, male to male

    VMX Battery Adapter Cable

    #70167
    $2.99

    Part# 70167

    The VMX Battery Adapter cable connects a VMX-pi power connectcor to an external battery supply.

    Detailed Specifications:

    • Cable Length: 25 cm
    • Wire Gauge: 20 AWG
    • Connector: JST-VH Wire Colors: Red (power), Black (ground)
    • Wire Free-end:  stripped and tinned

    VMX Cable Pack

    #70160
    $49.99

    Includes:

    • 4 JST-GH Cables (connects a VMX-pi GH signal connector to an external sensor or device such as the VMX breakout board).
    • 1 battery adapter cable (connects a VMX-pi power connector to an external battery supply).
    • 1 Wallwart cable (cable allows you to connect a VMX-pi to an external 12VDC Wallwart power supply).
    • 4 JST-GH to AMP breakout boards (connects a 4-pin .1" standard connect (Dupont/AMP).  The connector may either be a standard or a locking variety connector. Use to connect components such as an Ultrasonic Sensor or Encoders.

    VMX GH Cable

    #70168
    $0.99

    The VMX GH cable connects a VMX GH signal connector to an external sensor, breakout board or other device.

    Detailed Specifications:

    • Cable Length: 25 cm
    • Connectors: 4-pin JST-GH (2)
    • Wire Colors: Black, Red, Blue, Green

     

    VMX Wallwart Adapter Cable

    #70166
    $5.99

    The VMX Wallwart Adapter cable connects a VMX power connector to an external 12VDC Wallwart power supply.

    Detailed Specifications:

    • Cable Length: 25 cm
    • Wire Gauge: 20 AWG
    • VMX-side Connector: JST-VH Wire Colors: Red (power), Black (ground)
    • Wallwart-side Connector:  2.1mm inner diameter, 5.5" outer diameter, center-positive