Close
Main Categories
    Filters
    Preferences
    Search

    Arduino

     

    Arduino Offers Creative Solutions for DIY Makers Around the World

    Arduino is an open-source electronics prototyping platform based on a flexible, easy-to-use hardware and software development platform. Arduino boards are intended for students, designers, artists and hobbyists interested in creating interactive objects for the world around them.

    View as Grid List
    Sort by
    Display per page

    Analog 180 Degree Micro Servo

    #T010050
    $6.17

    Analog 180° Micro Servo module is a high quality micro servo with the standard TinkerKit 3 pin connector to be plugged in the sensor shield.

    Arduino 9 axes motion shield

    #A000070
    Request a Quote

    Arduino 9 axes motion shield: Co-developed with Bosch, this shield integrates an accelerometer, a gyroscope and a magnetometer.

    Arduino Education Starter Kit

    #AKX00023
    Request a Quote

    Teach middle school students the basics of programming, coding, and electronics. No prior knowledge or experience is necessary as the kits guide you through step-by-step, you are well-supported with teacher guides, and lessons can be paced according to your students’ abilities. You can integrate the kit throughout the curriculum, giving your students the opportunity to become confident in programming and electronics with guided sessions and open experimentation. You’ll also be teaching them vital 21st-century skills such as collaboration and problem-solving.

    Arduino Engineering Kit

    #AKX00004
    Request a Quote

    Bring the power of the Arduino MKR1000 to the classroom with MATLAB and Simulink. The Arduino Engineering Kit is the ideal solution for university and advanced students, providing a state-of-the-art, hands-on incorporation of Arduino technology in an educational setting.

    The kit is primarily for three types of users: students learning about engineering, professors teaching engineering, and makers with an interest or background in engineering.

    The kit includes three cutting-edge Arduino-based projects that teach students fundamental engineering concepts, key aspects of mechatronics, and MATLAB and Simulink programming. These projects will challenge them intellectually and help them develop physical engineering skills — plus they’re just fun to do.

    The kit is sold in a hard plastic, stackable tool box for storage and years of reuse. Inside the box is an easy-to-use Arduino MKR1000 Board, several customized parts, and a complete set of electrical and mechanical components needed to assemble all three projects.

    In addition to the state-of-the-art, high-quality, open-source hardware provided, after registering online, each student will have access to a dedicated e-learning platform and other learning materials. Additionally, they are granted a one-year individual license for MATLAB and Simulink. This provides them with hands-on experience in system modeling and embedded algorithm development.

    The Arduino Engineering Kit is built on its own education learning management system with step-by-step instructions and lessons. The content of this kit is divided into six chapters, featuring a short introduction, a getting-started guide for the tools that will be used, a concepts section, and, finally, the projects themselves. Users will receive access to the online platform for one year and can purchase additional licenses to extend platform access.

     

    Includes,

    • Arduino MKR1000 Board
    • Arduino MKR Motor Shield
    • Arduino MKR IMU Shield
    • DC motor
    • 2 geared DC motors with encoder
    • Standard micro servo (180 degrees)
    • Hall sensor module
    • Ultrasonic sensor module
    • Webcam
    • LiPo battery
    • LiPo battery charger
    • Micro USB cable
    • Tinkerkit Module Cable (3-pin to 4-pin)
    • Tinkerkit Module Cable (3-pin)
    • 3 sets of assembly pieces
    • 2 wheels
    • Caster wheel
    • Timing belt
    • 2 timing pulleys
    • 2 DC motor mounting brackets
    • Metal shaft (90 mm)
    • 2 metal D shafts (50 mm)
    • 2 sets of distance spacers (6 mm, 17 mm)
    • 2 sets of M2 bolts (10 mm, 25 mm)
    • 3 sets of M3 bolts (10 mm, 15 mm, 25 mm)
    • Set of M2 nuts
    • Set of M3 nuts
    • Set of M3 lock nuts with nylon insert
    • 3 shaft collars
    • Propeller adapter screw
    • 2 magnets (Ø8 mm)
    • Thread (5 m)
    • 2 whiteboard pens
    • Sticker for vision recognition

    Arduino GSM Shield 2 (antenna connector)

    #A000106
    $64.19
    Arduino GSM Shield 2 (integrated antenna): It comes with an audio Jack, the new M10 firmware.

    Arduino ISP

    #A000092
    $11.77
    The Arduino ISP is a tiny AVR-ISP (in-system programmer) based on David Mellis' project FabISP. With this programmer you can upload sketches and burn the bootloader on any AVR based boards, including Arduinos. By uploading a sketch with an external programmer you can remove the bootloader and use the extra space for your sketch. The Arduino ISP can also be used to burn the Arduino bootloader, so you can recover your chip if you accidentally corrupt the bootloader. Burning the bootloader is also necessary when you use a new ATmega microcontroller in your Arduino, and you wish to use the bootloader to upload a sketch via the USB-Serial connection.

    Arduino Leonardo with Headers

    #A000057
    $17.16

    Arduino Leonardo with Headers is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.

    Arduino Leonardo without Headers

    #A000052
    $18.00

    Arduino Leonardo without Headers is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller, but this Leonardo board does not include headers.

    Arduino Micro

    #A000053
    $18.06
    The Arduino Micro is a microcontroller board, developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

    Arduino Micro without headers

    #A000093
    $15.84

    Arduino Micro without headers is a microcontroller board based on the ATmega32u4, developed in conjunction with Adafruit. The Micro is similar to the Arduino Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This Micro comes without headers.

    Arduino Motor Shield Rev3

    #A000079
    $25.50

    Arduino Motor Shield Rev3 is based on a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently.

    Arduino Nano

    #A000005
    $19.07

    Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It works with a Mini-B USB cable instead of a standard one. This Nano was designed and is being produced by Gravitech.

    Arduino Proto Shield Rev3 (PCB)

    #A000082
    $10.00

    Arduino Proto Shield Rev3 (PCB) makes it easy for you to design custom circuits for your next Arduino project. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder. It has extra connections for all of the Arduino I/O pins, and space to mount through-hole and surface mount integrated circuits if you need to. It's a convenient way to make your custom circuit and Arduino into a single module.

    Arduino Uno R3

    #A000066
    $31.96
    The Arduino Uno R3 is a microcontroller board. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno R3 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter.

    Arduino Uno SMD Rev3

    #A000073
    $18.29

    Arduino Uno SMD Rev3 is a microcontroller board based on the ATmega328. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from preceding boards in that it does not use the FTDI USB-to-serial driver chip.

    PoE module 12V

    #X000002
    $11.43

    PoE module 12V is a module designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-Ethernet (PoE) standard.

    PoE module 5V

    #X000010
    $12.04

    The AG9605-2BR is a module designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-Ethernet (PoE) standard. AG9605-2BR provides the PoE compatibility signature and power classification required by the Power Sourcing Equipment (PSE) before applying up to 9W power to the port. The high efficiency DC/DC converter operates over a wide input voltage range (36V to 48V typ) and provides a regulated low ripple and low noise output. The DC/DC converter also has built-in overload and short-circuit output protection.

    Tinkerkit Dmx Master Shield

    #T040060
    $24.08
    The TinkerKit! DMX Master Shield is used to drive a series of DMX receivers. In order to be programmed via Arduino, it requires the DMX Library Like a regular shield it has to be plugged on top of the Arduino and it can be stacked on top of other shields. It is used both as OUTPUT and INPUT (also if the official library at the moment supports only the OUTPUT communication). For each line it has two kinds of port that can be used: the DMX connector or normal pins. On the front it has two DMX connectors, one for the INPUT and one for the OUTPUT.

    Tinkerkit DMX Receiver - Relay

    #T020100
    $65.00

    Tinkerkit DMX Receiver - Relay is a DMX module that mounts four relays; they can be individually controlled using a DMX master like TinkerKit!'s DMX Master Shield. It requires 12V and each relay supports up to 220V at 10A. A single master can control up to 512 receivers individually (128 of these boards for example) sequentially connected.

    The DMX Mosfet Receiver can also work as a standalone USB board. It is able to mount a micro-USB connector and the same microcontroller as the Arduino Leonardo.

    TinkerKit Gyroscope 2 Axis sensitivity 4X

    #T000062
    $17.25

    TinkerKit Gyroscope 2 Axis sensitivity 4X is a device that measures orientation. This module outputs 0V to 5V on one of its two signal pins when its angle is changed (e.g. is moved). The value is approximately 2.5V when there is no angle change in the X or Y axis. When you connect this module to the input on an Arduino using the TinkerKit Shield, you can expect to read values between 0 to 1023, while changing the angle of the module.

    This version of the module outputs the 4X pins on the chip. It is a sensor and each connector is an output, which must be connected to one of the input connectors on the TinkerKit Shield.

    TinkerKit Hall Sensor module

    #T000070
    $6.82

    TinkerKit Hall Sensor module creates a voltage related to the magnetic field around the sensor. This can be used to detect distance from a nearby magnet. Hall sensors can also be used to detect the magnetic field induced in a wire or coil.

    TinkerKit Linear Potentiometer module

    #T000150
    $6.01

    TinkerKit Linear Potentiometer module is a commonly used variable resistor. This module outputs 5v when the slider is at one end and 0v when moved in the opposite way. When connected to an input on the Arduino using the TinkerKit Shield, you can expect to read values going from 0 to 1023.This module features a 4k7 Ohm linear potentiometer, a signal amplifier, the standard TinkerKit 3pin connector, a green LED that signals that the module is correctly powered and a yellow LED whose brightness changes according to the position of the potentiometer.
     

    This module is a sensor. The connector is an output, which must be connected to one of the input connectors on the TinkerKit Shield.

    TinkerKit Red Led [10mm] module

    #T010118
    $4.01

    TinkerKit Red Led [10mm] module is a low power light source that is available in several different colors. It lights up when powered from an Arduino pin. This module features a 10mm red light emitting diode, the standard TinkerKit 3pin connector, a green LED that signals that the module is correctly powered and a tiny yellow LED that shows the current brightness of the red LED. A resistor provides the optimal amount of current when connected to an Arduino.

    Note: This module is an actuator, therefore the connector is an input that need to be connected to one of the output connectors on the TinkerKit Shield.

    TinkerKit Sensor Shield V.2

    #T020010
    $11.93

    TinkerKit Sensor Shield V.2 allows you to hook up the TinkerKit Sensors and Actuators directly to the Arduino without the use of the breadboard. It has 12 standard TinkerKit 3 pin connectors.

    TinkerKit Tilt Sensor module

    #T000190
    $4.01

    TinkerKit Tilt Sensor module can detect when it is at an angle. This module contains two contacts and a small metal ball. When the sensor is in its upright position, the ball bridges the two contacts, completing the circuit. When the board is tilted, the ball moves, and the circuit opens. When upright, the module outputs 5V and when it is tilted, it outputs 0V. When connected to an input on the Arduino using the TinkerKit Shield, you can expect to read a value of 1023 when in its upright position and 0 when it is titled.

    This module is sensor. The connector is an output, which must be connected to one of the input connectors on the TinkerKit Shield.

    TinkerKit Vertical Rotary Pot

    #T000140
    $4.01

    TinkerKit Vertical Rotary Pot is a commonly used variable resistor. Turning the knob, if supplied at 5V, the output voltage on the middle pin is between 0 and 5V. This value is sent through the middle pin of the pot. This module gives you back a value between 0 and 5V referring to the position of the middle pin (0 totally left 5V totally right). If attached to an Arduino's input which uses the TinkerKit Shield, values are between 0 and 1023.

    This module is made up of a linear potentiometer of 4.7 kOhm, a signal amplifier, a 3 pins standard connector TinkerKit, a green LED which indicates that the module is correctly powered and a yellow LED with luminosity dependent on the potentiometer's position. This is a sensor. The connector is an output, which has to be attached to an input of the TinkerKit Shield.

    Toolkit Wires [100cm] module

    #T020080
    $2.00

    Toolkit Wires [100 cm] module are 100 cm long wires designed for TinkerKit with a 3 pin jumper on both sides to easily connect your TinkerKit products.

    USB 2 Serial Converter

    #A000059
    $11.69

    USB 2 Serial Converter converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Ethernet or any other boards with an FTDI cable-compatible connector.

    USB cable type A/B

    #A000045
    $1.84
    Standard USB 2.0 cable. Use it to connect Arduino Uno, Arduino Mega 2560, or any board with the USB female A port of your computer. Cable length is approximately 178cm.

    USB/serial converter WITHOUT headers

    #A000015
    $12.04

    Weight Sensor Module

    #SEN0160
    $16.95

    Weight Sensor Module is based on HX711, which is a precision 24-bit analog-to-digital convertor designed for weight scale and industrial control applications to interface directly with a bridge sensor. It not only has a few basic functions, but also contains high integration, fast response, immunity, and other features. This weight sensor lowers the cost of the electronic scale, and at the same time improves performance and reliability. The input interface is compatible with Arduino I/O port. The output adopts compact terminal that makes the sensor easier to connect.